Archived Portable Printers and TV Wall time Syncing.

[AssetsProtection]

So like...only three of ten of our hip printers work right now. Resetting the printers and trying to reconnect them do not seem to work... any suggestions?

Also how do the TV's on the walls turn on exactly at the specified store opening time? Im assuming its the electricity or the signal from the coaxil making it turn on but not sure.

 

[Hardlinesmaster]

On the printer:

Also something I've found out, to get out of being trapped on a hip printer or main printer, on the 9200 PDA hit CTRL + X and it force closes WebApps and RFapps. Disconnects you from everything. On the 9090 PDA hit the blue function key and then the CTRL key twice and up in the top left corner you will see a small window pop up. Hit EXIT and it force closes everything as well. Also good for if you want to do a new batch name when your tying transitions or revisions for peg and price accuracy labels for printing later. Hope this helps and pass along to new TM's at least as long as we have our PDAs. Looking forward to the new iPDAs (myDevice)!

Most tv' s turn on. The ones that don't, just turn on.

 

[mrknownothing]

On the printer:

Also something I've found out, to get out of being trapped on a hip printer or main printer, on the 9200 PDA hit CTRL + X and it force closes WebApps and RFapps. Disconnects you from everything. On the 9090 PDA hit the blue function key and then the CTRL key twice and up in the top left corner you will see a small window pop up. Hit EXIT and it force closes everything as well. Also good for if you want to do a new batch name when your tying transitions or revisions for peg and price accuracy labels for printing later. Hope this helps and pass along to new TM's at least as long as we have our PDAs. Looking forward to the new iPDAs (myDevice)!

Most tv' s turn on. The ones that don't, just turn on.

I don't know how ours go on in the morning, but at closing, the electronics TM turns them off manually.

 

[Retail Girl]

Most of our TVs don't turn on right now automatically, so they have to be turned on by hand (the remotes generally are useless for this at our store). So that means some of the upper ones don't get turned on all day unless our SFTL is there to do it, since he's about the only one tall enough to reach them.

 

[AssetsProtection]

We have programmed a remote to just turn them all on. However i wanted to try and have them all try and turn on all at once 😛

 

[see spot save]

The breaker boxes for my store (some of them, anyways) are in the electronics backroom. At 7:59 the boxes make a loud clunk (the breakers automatically switching, I assume) and most of the tvs turn on along with the video game and Beats displays.

 

[bullseyekindaguy]

The TVs are turned on at the breaker when the electrical system turns on the salesfloor lights for the day.

Some TVs, such as Westinghouse, Vizio, and Emerson's, have built-in surge protectors and will not turn on automatically because the tv interprets the incoming power as a surge of lightening, etc. Those TVs must be turned on at the remote

 

[Sarakiel]

So like...only three of ten of our hip printers work right now. Resetting the printers and trying to reconnect them do not seem to work... any suggestions?

Also how do the TV's on the walls turn on exactly at the specified store opening time? Im assuming its the electricity or the signal from the coaxil making it turn on but not sure.

Are the other printers a displaying a solid red color on the wireless button (middle one with wi-fi signals)? Have you attempted to do full re-configurations on the printers at your Sign/Label PC? There is a known issue of multiple printers at many stores not connecting properly, and it may have to deal with the network outage that occurred awhile back that is being looked into.

 

[AssetsProtection]

The TVs are turned on at the breaker when the electrical system turns on the salesfloor lights for the day.

Some TVs, such as Westinghouse, Vizio, and Emerson's, have built-in surge protectors and will not turn on automatically because the tv interprets the incoming power as a surge of lightening, etc. Those TVs must be turned on at the remote

This looks to be the answer I'm looking for.

 

[Hardlinesmaster]

So like...only three of ten of our hip printers work right now. Resetting the printers and trying to reconnect them do not seem to work... any suggestions?

Also how do the TV's on the walls turn on exactly at the specified store opening time? Im assuming its the electricity or the signal from the coaxil making it turn on but not sure.

Are the other printers a displaying a solid red color on the wireless button (middle one with wi-fi signals)? Have you attempted to do full re-configurations on the printers at your Sign/Label PC? There is a known issue of multiple printers at many stores not connecting properly, and it may have to deal with the network outage that occurred awhile back that is being looked into.

Gtc's to sar! I will ck on that.

 

[jenna]

So like...only three of ten of our hip printers work right now. Resetting the printers and trying to reconnect them do not seem to work... any suggestions?

No answers here, but we are having the same issues with the hip printers. We rebuild them, and they still don't work.

womp womp.

 

[Hardlinesmaster]

Sarakeil is seeking any info on the data max printers issues. I think he is trying to figure why the printers are not working. Please review the poll he did, a few weeks back.
http://www.thebreakroom.org/index.p...ct2-scanners-temporarily-out-of-service.8460/

 

[danimal]

On the printer:

Also something I've found out, to get out of being trapped on a hip printer or main printer, on the 9200 PDA hit CTRL + X and it force closes WebApps and RFapps. Disconnects you from everything. On the 9090 PDA hit the blue function key and then the CTRL key twice and up in the top left corner you will see a small window pop up. Hit EXIT and it force closes everything as well. Also good for if you want to do a new batch name when your tying transitions or revisions for peg and price accuracy labels for printing later. Hope this helps and pass along to new TM's at least as long as we have our PDAs. Looking forward to the new iPDAs (myDevice)!

Is there a way to do this on LPDAs?

 

[Hardlinesmaster]

Short list of added hotkeys/functions:

CTRL + Green Key = Enabled Cross Scan Mode (This is on by default whenever the device is cold booted)
CTRL + Red Key = Disable Cross Scan Mode
CTRL + B = Battery Life (Useful when the percentage isn't displaying properly (shows as '***' on the bottom of the wrapper)
CTRL + M = MAC Address (Useful for CSC troubleshooting)
CTRL + S = Serial Number of device (Useful for CSC troubleshooting)
CTRL + X = Close Naurtech session and exit to main screen on WebApps. (Best used when RFAPP's becomes unresponsive after a network disconnect or access point association issue)

Blue Func Key + 5 = Refresh (Effective in WebApps when a webpage doesn't load properly and to force the screen to come up)

An important thing to note about Cross Scan Mode, WebApp's and RFAPP's are two separate sessions and thus can each separately have an different scan mode enabled/disabled. (RFAPP's can have it enabled while WebApp's has it disabled, and the PDA will remember the settings for the two even when you toggle back and forth between the applications)

Also, Compucom/DRC fully supports replacements for the 9200, so if something breaks (screen, front glass, keyboard, trigger, rubber boot pieces, etc) it can be replaced, just make sure you select "MC9290" on the DRC page for the correct model type.
From member, Sarakiel.