MEGATHREAD Signing Tips, Tricks and Quips (along with howls of despair)

[Alexbegt]

If it's depth you're worried about, the walls can be adjusted back. We had to move the walls several inches back for the UppaBaby risers to fit. I was minimally involved with Baby so not sure where else in strollers risers would be going and if we're supposed to have them, we didn't get them sent to us.

I ended up doing this - we’ll see if it comes back to bite me in the end once we get the signing.

 

[SigningLady]

View attachment 17548View attachment 17547
View attachment 17549View attachment 17550
I ended up doing this - we’ll see if it comes back to bite me in the end once we get the signing.

Well now I definitely feel like we are missing ISM! We only have the basedeck covers for the UppaBaby focal, nowhere else. Our focal has 2 risers- one for the bouncer and another for the swing and then a highchair that sits on the basedeck. The taller riser has space on the side for all the boxstock. And the back of our focal is other merch, not displays.

We have several go backs for this project as not everything was set correctly or completely.

 

[BKop16]

Well now I definitely feel like we are missing ISM! We only have the basedeck covers for the UppaBaby focal, nowhere else. Our focal has 2 risers- one for the bouncer and another for the swing and then a highchair that sits on the basedeck. The taller riser has space on the side for all the boxstock. And the back of our focal is other merch, not displays.

We have several go backs for this project as not everything was set correctly or completely.

I love how I first found references to these special projects and "commercial activation" like 16 months ago and they still cant get stores everything they need.

 

[Alexbegt]

Well now I definitely feel like we are missing ISM! We only have the basedeck covers for the UppaBaby focal, nowhere else. Our focal has 2 risers- one for the bouncer and another for the swing and then a highchair that sits on the basedeck. The taller riser has space on the side for all the boxstock. And the back of our focal is other merch, not displays.

We have several go backs for this project as not everything was set correctly or completely.

It’s possible your store isn’t swaddle 2.0 premium like us.

But these special projects are a joke. OTC? Vendor comes 2 weeks after the intended set date. Sure we can sit on merch for 2 weeks…

Here’s how the gear aisle came out

 

[SigningLady]

It’s possible your store isn’t swaddle 2.0 premium like us.

But these special projects are a joke. OTC? Vendor comes 2 weeks after the intended set date. Sure we can sit on merch for 2 weeks…

Here’s how the gear aisle came out View attachment 17551View attachment 17552View attachment 17553

Yeah, we're just regular Swaddle 2.0. We're too low volume to get anything premium. 😆

 

[Alexbegt]

Still missing some signage, but it actually turned out nice. Mysupport rushed the order for our baby ISM for car seats so we got it in yesterday.

 

[Alexbegt]

Signing for OTC arrived. Fixtures are coming next week.

I can feel it’s gonna be a disaster, they loaded 38 pegboard onto a pallet and started to put fixtures on top 🙄🙄

 

[BKop16]

Signing for OTC arrived. Fixtures are coming next week.

I can feel it’s gonna be a disaster, they loaded 38 pegboard onto a pallet and started to put fixtures on top 🙄🙄

Our GC isn't coming until the week after it's due to set.

 

[Alexbegt]

Our GC isn't coming until the week after it's due to set.

Ours doesn’t come until 2 weeks after the set lol.

 

[BKop16]

Were gonna try to set it with the extra shelf and just lift them off when the gc arrives.

Also not sure why this needs a GC. Its not like the PMLs dont have experience changing out gondola in seasonal.

 

[kangkang]

Anybody still have the instructions for the baby brown house skeleton? Im not sure if were supposed to have it and my etl is looking for it. Thanks

 

[Alexbegt]

Were gonna try to set it with the extra shelf and just lift them off when the gc arrives.

Also not sure why this needs a GC. Its not like the PMLs dont have experience changing out gondola in seasonal.

Lift off the shelves? They have to change the entire spine to be taller so unless you plan on demerching both sides to ensure they can do that.

 

[Alexbegt]

Anybody still have the instructions for the baby brown house skeleton? Im not sure if were supposed to have it and my etl is looking for it. Thanks

It had instructions - but I threw mine out. I think you can find them on workbench. If you needed them the parts would be listed on the SPLN.

For instance, D122 SP 14 at my store has the parts

 

[IceIceBaby]

Will they send more shelves and pushers for OTC or just gondola fixtures? Also hope they send more shelf strip holders, we haven't receive any new ones in half a year and were reusing old ones.

 

[SigningLady]

Will they send more shelves and pushers for OTC or just gondola fixtures? Also hope they send more shelf strip holders, we haven't receive any new ones in half a year and were reusing old ones.

Shelves and pushers will likely be sent, label strip holders, probably not. Why hasn't your store ordered any if they are needed? We always have at least two boxes on hand of that kind of stuff so that they can be replaced when needed to maintain a clean consistent brand.

 

[Alexbegt]

shelf label strips holders won’t be, but my store is getting 26 new rolling vitamin shelves.

Pushers, shelves, pegs are being sent; but that’s it.

If the order FX0007, it should come within like 2 weeks. My store has like a half pallet of them because everyone kept ordering them 😂

 

[IceIceBaby]

Shelves and pushers will likely be sent, label strip holders, probably not. Why hasn't your store ordered any if they are needed? We always have at least two boxes on hand of that kind of stuff so that they can be replaced when needed to maintain a clean consistent brand.

We've ordered many times they never come in.

 

[BKop16]

shelf label strips holders won’t be, but my store is getting 26 new rolling vitamin shelves.

Pushers, shelves, pegs are being sent; but that’s it.

If the order FX0007, it should come within like 2 weeks. My store has like a half pallet of them because everyone kept ordering them 😂

You either have enough of fx0007 to change the entire store or you're out. There is no in-between.

 

[Sisyphus]

\

 

[Sisyphus]

 

[TargetMcFly]

Does someone have part # for the tower clear front fencing? So stuff doesn't fall over?

 

[Alexbegt]

Anyone notice now we can audit as we set but the devices are SUPER slow while setting now?

There's this fancy fade animation that takes 20 years to complete between steps, scanning an item while on set half the time gets stuck and you have to close the popup to get the next item to appear and you no longer can see in the back counts. Instead it says: '0 on floor, 0 in back 24 on hand' with the 24 in the back lol.

I like that I can audit before I go, but it's quite annoying with how slow it is.

 

[TargetMcFly]

Anyone notice now we can audit as we set but the devices are SUPER slow while setting now?

There's this fancy fade animation that takes 20 years to complete between steps, scanning an item while on set half the time gets stuck and you have to close the popup to get the next item to appear and you no longer can see in the back counts. Instead it says: '0 on floor, 0 in back 24 on hand' with the 24 in the back lol.

I like that I can audit before I go, but it's quite annoying with how slow it is.

Yep that fade effect is pointless and needs to go. The set screen of all places.

 

[RunForACallBox]

Our GC isn't coming until the week after it's due to set.

Same for us

 

[Targen]

Anyone notice now we can audit as we set but the devices are SUPER slow while setting now?

There's this fancy fade animation that takes 20 years to complete between steps, scanning an item while on set half the time gets stuck and you have to close the popup to get the next item to appear and you no longer can see in the back counts. Instead it says: '0 on floor, 0 in back 24 on hand' with the 24 in the back lol.

I like that I can audit before I go, but it's quite annoying with how slow it is.

I don't think I've seen a fade, but ever since Wednesday when I scan something in Set it pops up for a brief second and disappears. Then the popup never shows again. It's really annoying.